Node
Version vom 30. Dezember 2014, 16:36 Uhr von Kaleng (Diskussion | Beiträge)
Aufsetzen eines Nodes mit Debian
/etc/apt/sources.list
deb http://repo.universe-factory.net/debian/ sid main deb-src http://repo.universe-factory.net/debian/ sid main
für wheezy werden backports benötigt!
aptitude update; aptitude install fastd batman-adv-dkms; mkdir -p /etc/fastd/mesh-vpn/backbone git clone https://github.com/ff-kbu/fastd-pubkeys /etc/fastd/mesh-vpn/backbone
/etc/fastd/mesh-vpn/fastd.conf
drop capabilities yes; forward no; hide ip addresses yes; hide mac addresses yes; peer group "backbone" { include peers from "backbone"; } interface "mesh-vpn"; log to syslog level info; method "salsa2012+umac"; mode tap; mtu 1426; on up sync "./fastd-up"; pmtu no; secret "[KEY HERE";
/etc/fastd/mesh-vpn/fastd-up
#!/bin/sh /sbin/ip link set dev mesh-vpn up /usr/sbin/batctl if add mesh-vpn /usr/sbin/batctl it 5000
chmod +x /etc/fastd/mesh-vpn/fastd-up /usr/bin/fastd --generate-key # enter key
/etc/fastd/mesh-vpn/upload_keys
#!/bin/sh KEY=`/usr/bin/fastd --config /etc/fastd/mesh-vpn/fastd.conf --show-key | cut 9-` WGETC=`which wget` VERSION="debian node" MAC=`/sbin/ip link show dev bat0 | tail -n 1 | cut -c 16-33` DELAY=30 while [ 1 = 1 ] do $WGETC "$UPLOAD_URL/upload_key?nodeid=${MAC}&_method=post&key=${KEY}&fw_version=${VERSION}" -O - > /dev/null && break sleep $DELAY [ $DELAY -gt 42300 ] && DELAY=84600 || DELAY=$((DELAY * 2)) done